ADT® Authorized Dealer Serving Camden & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Camden Residence

Residents must safeguard against numerous risks like fire, flooding, and burglary. But what about a risk that you aren’t able to smell or see? Carbon monoxide presents unique challenges because you may never know it’s there. Despite that, installing CO detectors can simply shield your loved ones and property. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Camden property.

What Is Carbon Monoxide?

Called the silent killer as of a result of its lack of color, taste, or odor, carbon monoxide is a common gas caused by incomplete fuel combustion. Any fuel-utilizing appliance like an oven or furnace can produce carbon monoxide. Although you normally won’t have a problem, difficulties can crop up when equipment is not regularly inspected or properly vented. These missteps may lead to a proliferation of this dangerous gas in your residence. Generators and heaters of various types are commonly culpable for CO poisoning.

When in contact with lower concentrations of CO, you may notice dizziness, headaches, fatigue nausea, or vomiting. Continuous exposure to elevated amounts may result in cardiopulmonary arrest, coma, and death.

Suggestions On Where To Place Camden Carbon Monoxide Detectors

If you don’t own at least one carbon monoxide detector in your residence, buy one now. Preferably, you ought to use one on each floor, and that includes basements. Review these recommendations on where to place carbon monoxide detectors in Camden:

  • Install them on every level, especially in places where you use fuel-burning appliances, including furnaces, fireplaces, gas dryers, and water heaters.
  • You ought to always install one no more than 10 feet away from bedroom areas. If you only install one CO detector, this is the place for it.
  • Position them approximately 10 to 20 feet from potential CO sources.
  • Avoid installing them right next to or above fuel-consuming appliances, as a little carbon monoxide may be discharged when they turn on and trigger a false alarm.
  • Secure them to walls about five feet from the floor so they can sample air where occupants are breathing it.
  • Avoid installing them near doors or windows and in dead-air areas.
  • Install one in areas above garages.

Test your CO detectors regularly and maintain them according to manufacturer guidelines. You will usually have to replace units in six years or less. You should also make certain any fuel-burning appliances are in in good working order and sufficiently vented.