Categories

System hiccups and false alarms can be aggravating, and more importantly, could prevent your home’s security from doing its job effectively. Thankfully, most problems, from dead batteries to false alarms, are easy to remedy. Take a look at our tips for troubleshooting your home alarm system in Camden. We’ll help keep your household protected and your system operating the way it should.

Test Your Home Security System In Camden

One of the most sensible ways to troubleshoot your property’s security is to test it! Modern systems permit you to put them in test mode to prevent you from triggering an emergency call. Once in test mode, follow these steps:

• Activate your system as you typically would when heading out.
• Open a door or window that has a contact sensor, or try to trip something else. Close the door or window so it doesn’t prompt the alarm as you reactivate the system.
• Let the alarm go off for 60 seconds to ensure communications with the security company and to produce an entry in the alarm system log.
• Proceed to test equipment as you wish
• Inspect the systems’s activity log to validate proper function.

No need to worry, monitoring professionals can see that your system is involved in a test. Just be sure to turn test mode off when done. It’s wise to test once a month or whenever you adjust your home’s phone or internet service.

Check The Placement And State Of Motion Sensors

Although an crucial part of your alarm system, motion sensors are prone to false alarms. Do your part to prevent them with some easy troubleshooting.

• Conduct a physical check. Are there items that could move within the path of the sensor, like drapery blown in a breeze?
• Is the sensor dirty? Grime, dirt, and cobwebs can lead to malfunctions. Check to confirm the sensor is clean.
• Does the motion detector offer pet immunity you can enable? Some sensors can be programmed to disregard pets up to 100 pounds.
• When was the battery replaced? A low battery can impact performance or cause false alarms.
• Is the sensor facing a heat source? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Signals

One helpful perk of new home security systems is that they’ll tell you when batteries are running low. If your system has a mobile app or control panel, you’ll typically see notifications there. Depending on your alarm, you could detect an intermittent beep when batteries are running out. 

Contact sensors, motion detectors, smoke detectors, and other wireless components have batteries that will have to be replaced every so often. It’s best to keep batteries ready and create a replacement schedule. Many systems also have a backup battery for the central control panel. This backup battery keeps your system functioning if you have a power outage and should recharge itself once power is restored. If it doesn’t recharge, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Camden 

As the top name in home security, ADT creates systems that supply unsurpassed functionality and convenience. Getting into test mode is easy through MyADT.com or the ADT+ app, and you’ll always get updates when a sensor battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Camden home and family. Dial (856) 259-5771 or complete our form today!